Tomahawk ARC-2002 180A /200A Inverter ARC Welding Machine | Dual Phase | 60% Duty Cycle | 72V Open Circuit | Runs up to 4.0mm Rod | 1+2 Phase 230V /380V | IGBT Hot Start & Anti-Stick | 5 PCB

Features

• 60% DUTY CYCLE the number that separates a real welder from a toy. Most cheap machines stall at 2035% and force you to stop and cool down. This one welds 60 minutes out of every 10 at full 180A/200A, so a truss joint or a gate gets finished in one go.
• 72V OPEN CIRCUIT VOLTAGE strikes the arc first time, every time, even on a damp or thick rod. Supports 1.6mm, 2.5mm, 3.15mm, 4.0mm electrodes, so it will run a full 4.0mm rod all day something most machines in this price band cannot do.
• 5 PCB HEAVY BUILD five separate boards instead of the single board used in cheap machines, so heat and load are spread rather than concentrated. Runs on 1+2 Phase 230V/380V, for workshop and truss work where the supply is not always clean.
• IGBT WITH HOT START, ANTI-STICK AND OVER-VOLTAGE PROTECTION the rod does not weld itself to the job, the arc lights instantly, and the machine protects itself when the mains spikes. Forced air cooling, 85% efficiency, IP21 rated.
• EVERYTHING IN ONE BOX Electrode Holder with Cable, Ground Clamp with Cable, Welding Hand Gloves, Welding Shield, Weld Cleaning Brush, Welding Machine Manual. Nothing else to buy. 6 Months warranty against manufacturing defects.