Binardat 8 Port 10 Gigabit SFP+ Managed Switch, Supports 1G /10G SFP+ Module, 160Gbps Bandwidth, Web L3 Managed, Fanless Fiber Desktop Network Switch Metal

Features

• 10G SFP+ Slot: 8 x 10Gbps SFP+ ports, support 1G/2.5G/10G SFP module. It is recommended to use high-quality optical modules and fibers to achieve the best transmission rate
• L3/L2 Web Managed: supports L3, IPv4/IPv6 management, static routing, OSPF, RIP, BGP4, DHCP server, QoS, ACL, SNMP, STP/RSTP/MSTP (ERPS), bandwidth control, flow control, Spanning Tree, link aggregation, loop detection; support Vet configuration LAN, IP-IP-IP. . MAC-VLAN Port binding, device/port status request. Compatible with console/telnet/SSH
• 160Gbps Bandwidth:The switching capacity is 160Gbps, higher data bandwidth, all ports support 10G non-blocking line speed up and downstream.
• Standard SFP Slot: open standard SFP slot interface, no encryption, multi-mode compatible, single mode, SFP to RJ45 module. ***SFP module not included, direct connection to network cable is not supported***
• Widely used: metal housing, fanless design, quiet and stable operation, tabletop installation and wall mount, suitable for high-speed and long distance fiber networks, used in home, office, data center, etc
• Note: If the optical module cannot be recognized, please use the 10G rate of a new well-known optical module. If the DAC cable cannot be recognized, enter the web interface and enable DAC support: switch_configport_config Switch_Config -> Port_Config -> Port_10G_Mode