Boat Anchor Kit with Rope and Chain, Heavy Duty Fluke Anchor for Boats | Hot Dip Galvanized Steel, Pontoon Sailboat Fishing Deck, Multiple Sizes, Better Boat

Features

• YOUR BOAT STAYS PUT IN WIND, WAKE, AND CURRENT: When a cheap anchor drags, your boat ends up on the rocks or into another hull. This 13lb fluke digs into sand and mud on the first set and holds boats up to 32 ft through tides, wind, and current.
• COMPLETE KIT READY TO RIG: Includes the 13lb galvanized fluke anchor, 8 ft of 5/16 inch galvanized chain, 100 ft of 3/8 inch nylon rope with stainless steel thimble, and two bow shackles. Everything connects together. Nothing sold separately.
• HOT DIP GALVANIZED, NOT ZINC PLATED: Bargain anchors use thin zinc plating that chips and corrodes in one season. This anchor and chain are hot dip galvanized, the same process used on bridge cables. Resists rust in salt and fresh water for years.
• PRE DRILLED RECOVERY HOLE SAVES YOUR ANCHOR: Flukes snag on rocks and roots. Most anchors make you cut the line and lose it. This one has a pre drilled hole in the crown so you can rig a retrieval line and pull it free from the opposite direction.
• SIZED FOR 20 TO 32 FOOT BOATS: The 13lb anchor with 8 ft of chain and 100 ft of rope covers pontoons, deck boats, center consoles, sailboats, and fishing boats in that range. Also available in 8.5lb for 15 to 24 ft and 5lb for boats under 15 ft.