Bestarc Plasma Cutter, [Large LED Display] 55A Plasma Cutter Machine 110 /220V Dual Voltage IGBT Inverter, 5 /8 Inch Clean Cut 3 /4 Inch Max Cut, Post Flow, 2T /4T for Beginners DIY

Features

• [Powerful Cutting Ability] Dual voltage 110/220V good for home, workshop and hardware shop use. Professional performance 1/2 clean cuts on Iron, Steel aluminum and copper with Inverter IGBT technology. Very powerful for DIY and heavy duty project. The Maximum cutting thickness is recommended to 1/2 (12mm)@35A 110V 50PSI; 3/4 (18mm)@55A 220V 65PSI. Dry and compressed air is required. Power breaker up to 40A@110V 35A; Up to 30A@220V 55A.
• [Contact Arc Start]: Bestarc plasma cutter without pilot arc function. It uses a high-frequency 50/60Hz IGBT inverter technology to deliver stable cutting power up to 55A. The PT31 cutting torch must touch the metal surface directly to start the arc. Plasma cutter provides smooth, precise and clean cuts, perfect for DIY and workshop projects.
• [Air Regulator]: Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT connector which can be used after opening the box, Once connected to an air compressor, the recommended air pressure should be within 60 PSI, with a flow rate of 250 liters per minute. Note: The compressor needs to be purchased separately.
• [LED Screen Display]: The screen centrally displays parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If the plasma cutter cannot work, the screen comes with an error code, making it easy to find out the problems.
• [2T/4T/PA/PT Function]: Post time adjustable from 3-15s to cool the torch. Adjust the cooling time of the torch head to extend the service life of consumables. We recommend a cooling time of 4-8 seconds. PA adjusted the time when pressing the torch in the no-load state. 2T/4T automatic cutting release your finger. 2T is a semi-automatic cutting control, and 4T is an automatic cutting control.