Bestarc 50A Plasma Cutter Machine, BTC500 5Gen 110V /220V, 2 /3'' Max Cut

Features

• [Smart APP Remote Control Distance to 98 feet] Control this plasma cutter remotely via Bluetooth APP from up to 98 feet (30 meters) away. Adjust cutting current, switch modes, save your preferred settings, and use remote diagnostics to check operating conditions in real time-no need to walk back to the machine. This smart design improves flexibility and efficiency for car repairing, workshop, farm, hobbies repairing, small job projects, Home, DIY.
• [Powerful Cutting Ability]BTC500 5th Gen plasma cutter features 110V/220V dual voltage and IGBT inverter technology, delivering up to 50A of cutting power. Recommended cutting capacity is up to 1/2" at 35A/110V and 5/8" at 50A/220V, depending on material and cutting speed. Recommended breaker: 40A at 110V.
• [Contact Start Arc]The PT31 cutting torch uses touch-start ignition and must contact the metal surface to start the arc. This direct-contact design provides a simple and intuitive start-up process, making it easy for beginners and DIY users to operate. Without a pilot arc, the torch only starts cutting when it makes direct contact with the workpiece, helping provide controlled operation on flat metal surfaces. Includes quality accessories and a 220V power plug.
• [Air Pressure Sensor]The built-in air pressure sensor monitors the air supply during operation. Users can manually adjust air pressure through the regulator. The rear-mounted air filter features a 1/4" NPT quick connector for convenient setup. An air compressor is required; recommended air supply is up to 90 PSI with a flow rate of 250 L/min. Compressor sold separately.
• [Large LED Screen Display]The large LED screen clearly displays key parameters including air pressure, voltage, current, post-flow time, 2T/4T, error codes, and fan status. Monitor the machine's operating status at a glance and quickly identify potential issues through the displayed error codes.
• [PT/2T/4T Function]Post-flow time is adjustable from 315 seconds to help cool the torch and extend consumable life; 48 seconds is recommended for most applications. 2T provides manual torch control, while 4T allows continuous cutting without continuously holding the trigger. Read the manual carefully before operating the plasma cutter.