3M 5925 Double Sided Tape, 2 in x 16.4 ft Heavy Duty Foam Tape, 2 Pack | 0.025 in Black Acrylic Foam, Water-Resistant Bond, for RV, Auto, LED Strips, Metal, Glass, Tile and Wood

Features

• SURFACES & WARNINGS: This 3M double sided tape (model 5925) is a high-strength foam tape 0.025 in / 0.6 mm thick black acrylic foam tape with PE liner. It bonds to aluminum, steel, glass, marble, tile, powder-coated paints, composites, plastics, and hardwoods. Its viscoelastic adhesive works on both high and low surface energy materials. Not recommended for heavily textured surfaces or painted drywall removal may lift paint.
• STRENGTH & USES: This double sided foam tape delivers 20 lb/in peel adhesion and 90 lb/in dynamic shear strength on stainless steel. Ideal for: RV solar panels, car spoilers, automotive trim, registration plates, nameplates, LED strips, signage, power strips, mailboxes, mirrors, frames, and home/automotive decorations. Replaces screws, rivets, and welding.
• NO HOLES, NO MESS: This thin double sided tape provides virtually invisible fastening also works as automotive double sided tape for trims and emblems. Keeps surfaces smooth and aesthetically pleasing. Eliminate drilling, grinding, refinishing, screwing, and welding no unsightly bumps or holes. Allows use of thinner, lighter materials while maintaining a clean, seamless look.
• CURE TIME: This 3M foam double sided tape bonds on contact for instant handling with no drying time. At room temperature, it reaches 50% of ultimate strength after 20 minutes, 90% after 24 hours, and 100% after 72 hours avoid heavy loads before full cure. This 3m double sided tape also creates a permanent seal against water, moisture, and air.
• USER GUIDELINES: For double sided automotive tape performance, clean the surface with a 50:50 mix of isopropyl alcohol and water, then apply tape when the temperature is between 70F100F (21C38C) avoid below 50F (10C). Press firmly or use a J-roller at 15 psi (100 kPa). If the liner is hard to peel, cut a corner with a knife first.