ALECPEA Ceramic Glue Repair, 30g Thick Porcelain Glue with 3 Precision Droppers

Features

• FILL THE BREAK, NOT THE COUNTER Thin glue can race away from a chipped edge, pool under the piece, and leave too little adhesive where it matters. This 30g thick ceramic glue stays on the repair line and covers small gaps in imperfectly matched breaks, giving you controlled placement on pottery, porcelain, tile, planters, sinks, and ceramic dcor before it sets in 45 seconds.
• KEEP THE REPAIR DISCREET An opaque ridge or yellow-looking seam can make a treasured vase, tea set, or display piece look worse than the original chip. The clear-cure formula dries transparent and is designed to minimize visible residue without attacking glazed ceramic surfaces, while its thick body helps create an even joint on chipped edges, uneven pottery, bathroom ceramic, and decorative porcelain.
• CONTROL EVERY DROP Adhesive that runs down a vase, tile, or sink can stain the work area, stick fingers, and turn a two-minute fix into an aggravating mess. The thick consistency stays where you place it, while the narrow outlet and 3 precision droppers help meter small amounts along broken edges. You get cleaner application and more working control for home repairs, craft studios, antique work, and service calls.
• STOP REPEATING THE SAME FIX A brittle, underfilled joint that breaks again wastes your time and can damage the piece beyond repair. After a 24-hour full cure, this cyanoacrylate creates a hard, water- and heat-resistant bond for routine splashes, hand washing, and warm-water exposure. Use it on mugs, planters, tile, sink trim, vases, and figurines; repair food-contact areas only when compliance is documented.
• MORE COVERAGE, LESS WASTE A small tube can empty before a larger chipped edge is covered, but an oversized workshop bottle may harden before you need it again. The compact 30g bottle suits repeated household, pottery, flower-shop, rental, and maintenance repairs. Clean and dry both surfaces, test-fit the pieces, apply a controlled layer, press during the 45-second set, and leave undisturbed for 24 hours.