1st Aug 2026, 12:20 AM
1-7 /8 inch 320 Grit Silicon Carbide TwistFlex Cylinder Hone 46-48mm | Bores 1.77 inch-1.89 inch for KX85 2001-18, RM85 2002-18, KTM85 SX 2003-18, YZ85 2002-18, CR80F 2004-09, CR85R 2003-07 YZ80 1982-2001
Price may vary by location, shipping cost, and availability.
Lowest ever
37% Off
$31.59
$49.99
Highest: $31.59
Average: $31.59
Lowest: $31.59
Price History Graph
Offer Price Prices
Lowest: -
Average: -
Highest: -
Price History Information
You can check the price history of 1-7 /8 inch 320 Grit Silicon Carbide TwistFlex Cylinder Hone 46-48mm | Bores 1.77 inch-1.89 inch for KX85 2001-18, RM85 2002-18, KTM85 SX 2003-18, YZ85 2002-18, CR80F 2004-09, CR85R 2003-07 YZ80 1982-2001 here. This product's current Price in USA is $31.59. The average and highest prices are $31.59 and $31.59 respectively.
| Lowest Ever Price | $31.59 |
|---|---|
| 27th Jul 2026 | |
| Average Price | $31.59 |
| Based on 7 days price tracking | |
| Highest Price | $31.59 |
| 27th Jul 2026 | |
Price History of All Variants of 1-7 8 inch 320 Grit Silicon Carbide...
Current Price in USA
| Price | $31.59 |
|---|---|
| MRP | $49.99 |
| Savings | $18.40 |
| Discount | 36.80% |
Product Information
Details
| Product Name | 1-7 /8 inch 320 Grit Silicon Carbide TwistFlex Cylinder Hone 46-48mm | Bores 1.77 inch-1.89 inch for KX85 2001-18, RM85 2002-18, KTM85 SX 2003-18, YZ85 2002-18, CR80F 2004-09, CR85R 2003-07 YZ80 1982-2001 |
|---|---|
| Store Product Code | B0CKRZGLY2 |
| Store Name | amazon.com |
| Brand | Pro-Graad |
| Rating | 10 / 10 |
| Category | Flex Hones |
| Product Manufacturer | Pro-Graad |
Features
- In the Box: 1 each Pro-Graad TwistFlex Size: 1 7/8" 1.875" (48mm) Bore Diameter, Working Length of Brush 3" (76mm), Shank Diameter 1/4" (6.35mm), Overall Length 8" (203mm). for USE ON BORE DIAMETERS 1.77" 1.89". This 320 Grit Silicon Carbide TwistFlex Cylinder Hone is an ideal choice for steel sleeved and Nikasil coated cylinders.
- The Pro-Graad TwistFlex 1 7/8 Cylinder Honing & Deburring Tool is manufactured oversized - ORDER BY THE BORE SIZE. Brush will be approximately ten percent oversized, but will easily conform and fit into the bore size diameter due to the flexibility of the honing tool stems.
- Pro-Graad TwistFlex Cylinder Honing & Deburring Tool brushes have round abrasive spheres fastened to ends of flexible stems, which produces pressure and finishing evenly and consistently. for Engine Cylinders, Brake Cylinders, Hydraulics and Valve Guides to quickly and easily deglaze and cross-hatch finish for oil retention and piston ring seating.
- The Pro-Graad TwistFlex Cylinder Honing & Deburring Tool can be run with hand tools, drill press, or CNC equipment. Not recommended for use with air tools. Apply a lubricant liberally such as a honing tool lubricant, 10-30 weight motor oil, or transmission fluid prior to using honing tool brush. Max RPM is 1000, however optimum range is 600 - 700 RPM. Tip: If producing cross-hatching pattern, less is best - maximum of two passes should be done with brush within 20-45 seconds of total run tim
- The 1.875 inch TwistFlex Cylinder Honing & Deburring Tool is self-centering, self-aligning and will conform to the bore diameter to provide consistent surface finishing, as well as deburring any cross-drilled holes. The brush is self-compensating to produce a consistent finish throughout the life of the tool.
Images
× ![]()
Rating and Reviews
10 Based on 2 reviews
1-7 8 inch 320 Grit Silicon Carbide has 10 rating out of 10. This average rating is consist of 2 individual ratings. You can rate this product at product review page.
* Predictions is created on based of past prices and trends, it does not guarantee that it will happen. These are just prediction for theoretical information only.