TAILI 4-in-1 Sponge Holder for Kitchen Sink with Strong Suction Cup Removable, Rustproof Aluminum Sink Caddy for Sponge, Brush, Scrubber, Scraper -Black

Features

• [Warm Tip]: This sponge holder works best for non-porous, impervious, smooth surfaces such as like metal, glass, tile, stainless steel and acrylic but NOT apply to uneven tiles, texture plate, unfinished marble, wallpaper, painted wall, etc. Please remind that don't stick to a grout line. If problems when firstly installation, please wash the suction cup, dry it with hair dryer and test it on the smooth glass surface. If suction holds, that means initial wall might not applicable for using suction cup, please change installation location
• [1 Second Installation & Removable]: Simply choose a smooth and dry surface without any grout, take off the protective cover and push the board "PUSH" hard until you hear "PUFF", ONE second to complete the installation.. No screws, no nails, no glue, no tools. The kitchen sink caddy can be re-positioned many times and removed without leaving residues (If problems when firstly installation, wash suction cup with warm water and try to install on the dry and clean sink after it is dried with a hair dryer)
• [Rustproof & Fast Draining, Keep tidy]: Measures 7" x 2.3" x 4.3" and creat sink storage in compact spaces. Made of aluminum finished in rustproof coating which not only prevents rust but also stands up to times. With all-around drainage design, the sponge caddy has maximum air ventilation and fully dripes water away. Holds Sponge, Scrubber, Scouring Pad, Drain Stopper, And More Keep your kitchen tools air dry quickly and clean
• [Durability & Strong Suction]: Comes with patened suction cup. The suction cup based on the bionics octopus sucker principle is made of TPE material, which hold up to 11 lbs. The sponge holder for kitchen sink and the sucker are water resistant so they can be used in wet areas such as sink for many years
• [Troubleshooting Tips]: If problems occur during installation, how can I quickly determine whether the problem is with the product or with the wall surface? Ensure that the suction cup is clean and dry, then install the shower mirror on a smooth, clean and dry glass surface. If the sponge holder can be installed well to the glass, this means that the initial installation wall is not suitable for the suction cups. If the sponge holder doesn't work on the glass, it is possible that the protective cover has come off, caused the suction cups to be dusty, so you can clean it and use it again or contact customer service