STIRRI-V2-TF no-clean MT soldering tacky paste flux (ROL0) - 5g amber syringe kit with pine scent - for mid-range handsoldering electronics, BGA, hot air rework, SMD assembly

Features

• Rosin-based, low-activity no-clean soldering tacky paste flux for hand-soldering electronic repairs and rework, primarily using Sn60, Sn62, Sn63 leaded MT alloys with a soldering iron or hot air station. Suitable for any level of training, with any basic, readily available amateur soldering tools. Fills the workspace with a distinctive, pleasant pine scent - V2 chemistry has been a prime choice for hot air electronics and automotive repairs. V2-TF is part of exclusive hotAIRework series.
• Mighty action - a noticeable booster for copper ions while wicking the workspace. Quickly breaks-up lead-free joints. Exceptional wetting - puts an operator in control. Excellent tackiness - holds components in-place yet allowing an easy repositioning by Hot Air. Long process window.
• Excellent flow from the syringe - 30-50 x10'3 mPa/s. Halide-free (<0.05%). Surface insulation resistant. No copper mirror breakthrough. Low electrochemical migration (<1 decade drop).
• ROL0 classification - non-corrosive, doesn't short components, can be left on board for multiple SMT assemblies (manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may potentially absorb moisture from air and subsequently cause corrosion). Clear residue can be easily removed by hot air, foam swab and basic solvents like isopropanol.
• Industrial air-syringe intended for professional use with pneumatic dispensing machines, do not remove the piston stopper Do not discard original nozzle cap, tighten the cap while not using the flux - flux may dry out upon extended contact with air. Use supplied dispensing tip and plunger to manually control the flow. Keep in a room temperature - do not refrigerate.