STAS Cliprail Picture Hanging System Starter Kit, 39.37 in, White

Features

• TWO CABLES, TWO HOOKS: hang two framed pieces side by side, or one wider piece from both cables so they share the load and the frame stays level. Add more cables and Zipper hooks later to hang more art on the same rail.
• EXTEND IT WALL TO WALL: every kit includes a rail connector, so order as many kits as your wall needs and join them end to end; cut the last rail with a hacksaw and the run looks built in, with room to hang art anywhere along it.
• CLIP IN ANYWHERE: each steel cable clips into the rail at any point along it, with no sliding in from the end of the rail and nothing to take down. The two 59 in cables hang flat, and the Zipper hook is 23.5 mm wide and 9 mm deep.
• IN THE BOX: 1 white aluminum Cliprail, 39.37 in (100 cm), 1 rail connector, 2 steel cables 59 in with cobra ends, 2 Zipper hooks, 2 end caps, 3 rail clips, screws and wall plugs for drywall, brick and wood. Paintable to match the wall.
• INSTALL ONCE WITH A DRILL: mark a level line, drill, fit the plugs and screw the rail clips in, then snap the rail on; a misplaced hole stays hidden behind the rail. Cut the rail to length with a hacksaw.