KOMAS 12 inch X 48 inch Tint Vinyl Film Sticker Sheet Roll for Car Headlight, Tail Lights, Fog Lights with Squeegee + Cutter (Glossy Red)

Features

• [COMPLETE DIY INSTALLATION KIT] Get everything you need in one package. This 12" x 48" tint wrap roll comes with a scratch-proof felt-edge squeegee and a precision utility knife. Perfect for beginners looking to customize their taillights without buying extra tools
• [THE PERFECT "RED-OUT" LOOK] Achieve a clean, uniform aesthetic. Specifically designed to tint over clear or amber turn signals and reverse lights, giving your vehicle a sleek, solid red taillight housing while protecting the plastic from light scratches.
• [FORGIVING WET APPLY METHOD] Designed for maximum adhesion, this non-air-release film requires a WET application. Simply spray a slip solution (water mixed with a few drops of dish soap) onto the adhesive side and the light. This allows you to slide and align the film perfectly before squeegeeing.
• [CRITICAL: 3-LAYER SYSTEM] Our film has a clear protective top liner to prevent squeegee scratches. IMPORTANT: Squeegee the soapy water out firmly, then you MUST peel off this top clear liner BEFORE using a heat gun to stretch the film around edges
• [HEAT REQUIRED FOR CURVES] Taillights often have complex 3D shapes. Once the water is squeegeed out and the top liner is removed, applying gentle heat (via heat gun or hair dryer) is essential to dry remaining moisture and stretch the film securely around corners. (Note: Intended for rear vehicle lights only).
• [100% RISK-FREE DIY GUARANTEE] First time tinting? We know accidents happen If you accidentally crease, tear, or ruin the film during your installation, please contact us immediately. We will promptly send a FREE REPLACEMENT. (Note: It is perfectly normal for vinyl rolls to show slight wrinkles or bubbles on the backing paper upon arrival due to shipping. These will completely disappear once the backing is peeled and applied wet.)