FEDUS ENERGO 12V 8A DC UPS for CCTV, 8 Channel Power Backup for DVR, NVR, Security Camera & Wi-Fi Router, Li-ion Battery, Zero-Lag Switching, Over-Current Protection, Wall Mount, 2 Year Warrantee

Features

• [Check Your Adapter Label Before You Order - Pre-Purchase Warning]: The FEDUS ENERGO is a 12V DC UPS for CCTV systems and Wi-Fi routers, so it only powers devices that take a 12V DC input. Check the adapter label on your camera, DVR, NVR or router first. Keep the total load within 8A (96W) by adding up the amp ratings on every adapter you plan to connect. Do not connect 5V USB devices, 24V or 48V PoE switches, 19V-20V laptops, desktop PCs or any 230V AC appliance; they will not work and can be damaged. Backup time depends on how much load you connect.
• [Keep Cameras Recording Through Every Power Cut - Zero-Lag Switching]: When the mains supply fails, ENERGO switches to its battery in under 1 millisecond, so your security cameras, DVR and Wi-Fi router stay on without rebooting or dropping footage. That means no blind spot in your recording during load shedding, sudden tripping or a voltage dip. Built as an 8 channel CCTV UPS, it gives your home, shop or office surveillance a steady 12V DC power backup, then moves back to mains on its own when power returns and starts recharging the battery.
• [Works With Your 12V Cameras, DVR and Router - Compatibility]: Compatible with 12V DC security gear from popular brands such as CP Plus, Hikvision, TP-Link, D-Link and Netgear. Use it with 12V AHD and analog dome, bullet and PTZ cameras, 12V DVR and NVR recorders, Wi-Fi routers, fiber ONT boxes and broadband modems, including JioFiber units that run on a 12V adapter. It is a CCTV power supply with battery backup, not a phone or laptop charger, and it does not power PoE IP cameras that draw power from a 48V PoE switch.
• [One Backup for Your Whole Security Setup - 12V 8A High Output]: A single ENERGO delivers a stable 12V 8A (96W) DC output, enough to back up several cameras, your DVR and your router together instead of buying a separate mini UPS for each device. Here is a quick way to size it: four cameras at 1A each, a DVR at 2A and a router at 1A add up to 7A, which fits within the 8A limit. Add up the amps printed on your own adapters, and keep the total at or below 8A for steady voltage and no overload alarms.
• [Built-In Protection for Your Costly Cameras - Multi-Stage Safety]: An intelligent IC chip watches the power flow and guards your connected devices against over-current, over-voltage, short circuits, over-charging and deep discharge of the battery. Smart thermal management keeps the unit from overheating during long backup runs in summer power cuts. If the load goes above the rated 8A, the overload warning lights up so you can remove a device before anything gets damaged, protecting both this CCTV UPS and the security cameras, DVR and router running on it.
• [Know Your Backup Status at a Glance - Smart LED Indicator Panel]: The front panel shows clear LED lights for Mains power, Backup mode and Overload or Low battery, plus a three-step battery level gauge at 30%, 60% and 100%. You can see right away whether the unit is running on mains, charging, or keeping your cameras alive on battery during a power cut, and you get an early warning when the battery is running low so you can plan ahead. No app or setup is needed, which makes it easy for anyone at home or in the shop to check.
• [Lighter and Maintenance-Free Power Storage - Lithium-Ion Battery]: ENERGO runs on a built-in lithium-ion battery pack instead of a heavy lead-acid battery, so it is lighter, needs no topping up and fits neatly next to your DVR or router. The intelligent charging circuit charges the battery when mains power is available and cuts off the current once it is full, which helps prevent overcharging and keeps the battery ready for the next power cut. It is a clean, compact battery backup for CCTV and Wi-Fi that works day and night without attention.