DSO3D12 Digital Oscilloscope 3 in 1 120M 250MSa / s 3.2in Screen Display Channel Digital Oscilloscope Bandwidth and Multimeter and Generator

Features

• 3 in 1 Design with Screen: This product integrates digital oscilloscope, multimeter, and generator into one device. 3.2in clear display screen, high sensitivity full view display, channel 2 waveform can be set to green, cyan, .
• Generator: Built in waveform generator, capable of outputting sine , , triangular , etc. The voltage amplitude is 2.5V, the frequency is adjustable between 02Mhz, and the duty cycle is adjustable between 1% and 99%.
• Multimeter: Built in true effective value multimeter, supporting software rapid calibration. Able to test DC AC voltage, DC AC current, , capacitance, diode, and on off. When measuring low voltage, , continuity, the oscilloscope and multimeter functions can be used simultaneously.
• Digital Oscilloscope: channel oscilloscope, with a bandwidth of 120MHz, and a channel mode bandwidth halved to 60Mhz. The sampling rate is 250MSa/s. With triggering function of automatic, single normal. Support sensitivity and time base adjustment, automatic mode adjustment, channel waveform analysis, cursor measurement, reference waveform, FFT spectrum, reference waveform, waveform saving and viewing. Equipped with channel mode, it can simultaneously measure.
• Sensitivity and Time Base: The oscilloscope will automatically detect the and adjust the range. Support manual adjustment of waveforms in both vertical and horizontal directions. Vertical sensitivity represents the voltage in the vertical direction, which is adjusted by the mV and V buttons to adapt to different voltages. The time base represents the time in the horizontal direction. Adjustments can be made through the S and NS buttons to adapt to different frequencies. In stop mode.