Brushbond Roofguard 4Ltr

Features

• High Build system provides higher dry film thickness of more than 1mm in three coats. The product can applied directly on existing sound concrete, brickbat coba, screed concrete even without removal No protection screed required eliminating the additional weight due to protection layer High resistance to the effect of long-term weathering, Durable in all climate conditions including UV attack.
• Surface Preparation All the surfaces which are to receive Brushbond Roof Guard must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with Fosroc Renderoc System.
• Mixing The contents of Brushbond Roof Guard shall be thoroughly stirred for at least 2 minutes using a slow speed (300-400 RPM) drill machine attached with a mixing paddle. Retempering with water should not be done. Keep on stirring during application.
• Application For best results, surfaces should be damp. In order to Obtain the protective properties of Brushbond Roof Guard it is important that the correct rates of application are observed. Use a short stiff brush preferably 120-150mm width and apply the mixed material like paint.
• The application of Brushbond Roof Guard should not be done if the temperature of the substrate is below 100C.