AURSINC TinySA Ultra+ ZS406 Spectrum Analyzer with Protective Case | 100kHz-5.4GHz Handheld Tiny Frequency Analyzer 2-in-1 RF Signal Generator with 4'' EVA Shell, for Ham Radio, Field Testing

Features

• Complete Portable RF Testing Kit: The TinySA Ultra+ ZS406 Bundle includes a protective carrying case, providing a convenient solution for RF measurement, storage, and transportation. The protective case helps shield your spectrum analyzer from scratches, dust, accidental impacts, and daily transportation wear, keeping your equipment protected during mobile testing
• Upgraded TinySA Ultra+ ZS406: Built on the latest HW V0.4.6, the AURSINC TinySA Ultra+ ZS406 features a 4.0 inch 480*320 touchscreen display for intuitive operation. It comes with a pre-installed 32GB micro SD card for convenient on-site data storage and sharing, and a built-in 5000mAh rechargeable battery that delivers at least 3 hours of continuous operation on a full charge
• Advanced Spectrum Analysis Capability: TinySA Ultra+ ZS406 provides portable spectrum analysis with frequency coverage from 100kHz to 900MHz, Ultra mode up to 5.4GHz. Switchable resolution bandwidth from 200Hz to 850kHz enables fast and accurate measurements; the 200Hz minimum RBW clearly separates adjacent signals and supports SSB two-tone intermodulation testing
• 2-in-1 Analyzer & Signal Generator: Doubles as a signal generator when not used for spectrum analysis. It outputs MF/HF/VHF sine waves from 100kHz to 900MHz, UHF square waves from 800MHz to 4.4GHz, and mixed signals from 4.4GHz to 5.4GHz. A built-in calibration signal generator supports automatic self-test and low-input calibration for sustained measurement accuracy
• PC Control: Connects to a PC via USB for data transfer and device control through the TinySA-APP, using Serial over USB (CDC) protocol with a full command set for measurements and internal settings. Drivers install automatically on Windows and are natively built into the Linux kernel
• [WHAT YOU GET] 1x Tinysa ULTRA Spectrum Analyzer; 1x Protective Carrying Case; 1x 32GB Micro SD card (plugged in the host); 2x 30cm ALSR100 SMA cables; 1 x USB Type-C data cable; 1x SMA-SMA barrel connector; 1x TLanyard and touch plectrum; 1x Antenna with SMA connector; 1x stylus pen