4th Sep 2026, 10:11 PM
ANYCUBIC PLA 3D Printer Filament, Glow in The Dark, 3D Printing PLA Filament 1.75mm Dimensional Accuracy + /- 0.02mm, 1KG Reusable Spool (2.2 lbs), Blue PLA, Glow Blue
Price may vary by location, shipping cost, and availability.
Lowest ever
26% Off
₹14,759
₹19,918
Highest: ₹14,759
Average: ₹14,759
Lowest: ₹14,759
Price History Graph
Offer Price Prices
Lowest: -
Average: -
Highest: -
Price History Information
You can check the price history of ANYCUBIC PLA 3D Printer Filament, Glow in The Dark, 3D Printing PLA Filament 1.75mm Dimensional Accuracy + /- 0.02mm, 1KG Reusable Spool (2.2 lbs), Blue PLA, Glow Blue here. This product's current Price in India is ₹14,759. The average and highest prices are ₹14,759 and ₹14,759 respectively.
| Lowest Ever Price | ₹14,759 |
|---|---|
| 30th Aug 2026 | |
| Average Price | ₹14,759 |
| Based on 12 days price tracking | |
| Highest Price | ₹14,759 |
| 30th Aug 2026 | |
Price History of All Variants of ANYCUBIC PLA 3D Printer Filament Glow in...
Current Price in India
| Price | ₹14,759 |
|---|---|
| MRP | ₹19,918 |
| Savings | ₹5,159 |
| Discount | 25.90% |
Product Information
Details
| Product Name | ANYCUBIC PLA 3D Printer Filament, Glow in The Dark, 3D Printing PLA Filament 1.75mm Dimensional Accuracy + /- 0.02mm, 1KG Reusable Spool (2.2 lbs), Blue PLA, Glow Blue |
|---|---|
| Store Product Code | B0CNWXVP1P |
| Store Name | amazon.in |
| Brand | ANYCUBIC |
| Rating | 9.6 / 10 |
| Category | Filament 3D Printing Materials |
| Product Manufacturer | ANYCUBIC |
Features
- lt contains fluorescent materials that can glow in the dark after absorbing light energy. Compared to similar products on the market, Anycubic Glow-in-the-dark PLA Filament has a brightness increase of 300% and a 150% increase in glow duration under the same lighting conditions. We recommend you to expose the prints to a full of sunlight or UV light for a period of time.
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
- - & - Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk.
Images
× ![]()
Rating and Reviews
9.6 Based on 8 reviews
ANYCUBIC PLA 3D Printer Filament Glow in has 9.6 rating out of 10. This average rating is consist of 8 individual ratings. You can rate this product at product review page.
* Predictions is created on based of past prices and trends, it does not guarantee that it will happen. These are just prediction for theoretical information only.