48.9 inch Length Front Brake Line for No-ABS 1996-2006 Some Dyna

Features

• Fitment List 1: For 1996-2006 Dyna Super Glide/Wide Glide/Low Rider non-ABS models with a 16" handlebar (Note: This is a lower brake line for the front single disc brake)
• Fitment List 2: For these models with a 12" bar: 20072008, 20102011 Dyna Wide Glide non-ABS; 2007-2011 Dyna street bob/super glide; 2012-2017 Dyna Street Bob non-ABS; 2012-2014 Dyna Super Glide Custom - FXDC non-ABS; 2014-2016 Dyna Switchback - FLD non-ABS; 2012-2017 Dyna Wide Glide - FXDWG non-ABS; 2000-2006 softail; 20072010 Softail Custom FXSTC; 2007 Softail Deuce FXSTD; 20072009 Softail Night Train FXSTB; 20072010 Softail Standard FXST non-ABS; 2011-2015 Softail non-ABS
• Extended Brake Line: Thread Size: 3/8-24 UNF, and 7/16-24 UNF. (Cable housing length 46.6", total length 48.9"). Banjo inner diameter: 10.2mm and 11.3mm, outer diameter(both): 17.3mm. Tube diameter: 7.6mm. Our Softail Dyna extension upper front hydraulic brake line hose is longer than stock to fit your new taller Softail handlebars or risers
• Quality You Can Trust: Our stainless steel braided brake line with black vinyl coating won't cause any damage to the areas where the cable touches. Durable inner wire can also ensure the whole cable has a longer life and better performance when using
• Better Work: With durable quality, our front brake line hose will greatly improve your braking effectiveness because there is almost no expansion under pressure, requiring less force to operate at its maximum. The brake lever feel stays firm (less squishy than rubber hoses) all the time. This advantage reduces braking distances and increases the efficiency of the calipers
• Easy to Install: Direct replacement for the stock short/old brake line, just need you to remove the stock brake cable without damaging the motorcycle, then follow the correct route/steps to install the new softail brake line hose
• Note: After installation, please remember to use a professional brake bleeder kit to bleed the brake system to eliminate the air bubbles.(Please find a professional mechanical person to bleed the brake system if you do not know how to complete this process, thank you)